Halo Hex Key Skewers – Locking Allen Key Skewer Set – Front & Rear

HALO Hex Key Skewer set

Lightweight Cr-Mo threaded rod with an hex key fitting and coloured alloy end covers.

The absence of any lever means these skewers offer improved security and reduced weight over a traditional QR skewer.

Features a steel ‘no-turn tab’ to prevent the end cone from rotating whilst doing up or removing.

There’s also a 15 x 3mm cone spanner recess cut into nut, just in case the ‘no-turn’ tab cannot operate.

Features:

Cr-Mo rods
Steel ‘no-turn’ tabbed washer insert
Serrated alloy frame grip surfaces
15mm cone spanner holding back-up on nut
Available in anodised Black, Gold, Blue, Green, Red, Purple or White Powder coated
 

Maximum width skewers can be used with:

Front 112mm (100mm hub width, plus 6mm drop out either side)

Rear 148mm (135mm hub width, plus 6.5mm drop out either side)

This includes the width of the hub, the width of the drop out, whilst keeping the end nut done up to a safe position on the thread.

Halo XL Hex Key Skewers are also available as an extra long option – please contact us about these if required.

Torque setting: 7Nm

Important information: Not recommended for aggressive off road use.